Everything you need to know about Evaporative Cooler Installer
The harsh and unbearable summer season is here. That means it's time for you to go for a cooling solution you decided on last summer.
If you are going for an evaporative cooler, then you have already made the first step in the right direction. It is an easy, effective, and natural solution for perfect cooling. If you already bought one, and have no idea how to install it, then do not worry; Uscomfort is here to help you.
Here is everything you need to know about evaporative cooler installation.
Two Ways to install Evaporative Cooler
There
are two ways you can install an evaporative cooler.
- Installing
Evaporative Cooler in the centralized location.
- Installing
Evaporative Cooler by connecting it to ducts for equal calling in all
rooms.
To
decide which way you need to go, in the process of being an evaporative cooler
installer. First, you need to analyze the space where the evaporative cooler is
needed.
Step by step guide for an Evaporative Cooler Installer
After
you have decided the preferred way to install an evaporative cooler, move
further in the process of installation. Follow these steps to be the perfect
evaporative cooler installer.
Step
1:
In
the very first step, you need the help of assembly support you got along with
the evaporative cooler. Most sellers provide an assembly supporter for the
evaporative cooler.
All
you need to do is, place the assembly supporter in the desired space,
specifically on a window for proper air circulation.
Step
2:
After
you have successfully installed the assembly supporter, it's time to bring out
the evaporative cooler. Place the unit on the assembly supporter. For maximum
and proper support, remember to attach brackets and wall hangers.
Step
3:
In
the next step, you need to attach a water line to the evaporative cooler. Make
sure that the cut off valve is installed between the water and the evaporative
cooler, as it will help you drain out the water. It is also vital in terms of
protecting your unit from getting damaged by water.
Step
4:
In
the final step, cover the unit with the air vent cover for proper cooling in
your home. It is a necessary step, so do not forget about it.
You
will find the air vent cover in the kit you got along with the unit. Before
buying, make sure you got everything in there.
Things to remember about being an evaporative cooler installer
- Keep
everything you need to install the evaporative cooler handy and
accessible.
- Make
sure you use the low voltage thermostat instead of the high voltage
thermostat to avoid any damage to your unit.
- Keep
the unit away from the kitchen, fuels, kids room, and bathroom.
- If
you already have an AC or Central air unit, apart from an evaporative
cooler, do not run them at the same time.
- Have
enough space near the unit for easy and proper maintenance; space should
be around a minimum of 3 feet of area.
- Take
necessary steps for safety and security. There should be the availability
of electrical disconnect near the evaporative cooler.
- After
one pump cycle, check the float valve setting.
Call The Professional
There
are a lot of things you still need to know about being an evaporative cooler
installer. If you are not experienced in installing an evaporative cooler, it
is highly advised that you take help from an expert.
Visit
uscomfort.com for a proper installation of an evaporative cooler. The cooling of your
home or office will be in safe hands with a well-trained technician and expert
evaporative cooler installer.
Visit here : https://www.uscomfort.com/air-conditioning/evaporative-swamp-coolers/
800-738-4160
818-430-4662
323-319-2060
Evaporative cooler repair
Evaporative cooler services
Evaporative cooler installer
Swamp cooler repair
Swamp cooler services
Swamp cooler installer
Comments
Post a Comment